EasyManuals Logo
Home>Cub Cadet>Tractor>7530

Cub Cadet 7530 User Manual

Cub Cadet 7530
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
SAFETY/DECALS
3. Cover the PTO shaft with a guard
when not using.
4. Be sure to engage the brake and
lower any attachment or implement
before disassembling any part.
5. Never adjust or service the tractor
when it is in motion or while the
engine is running. Always adjust
the brake or clutch properly in
accordance with the adjusting
procedure in the instruction book.
7. Hydraulic oil or fuel escaping
under pressure can penetrate
the skin, causing serious injury.
Before disconnecting oil or fuel
lines, be sure to relieve all pressure.
Before restoring pressure after
repair, be sure all connections are
tight and all hydraulic components
are in normal condition. If injured
by leaked fluid, see a doctor
immediately for proper treatment.
2
6. Do not remove the radiator cap
while the engine is running.
Shut down the engine and wait
until it cools sufficiently. For
removal, turn the cap to the first
stop to relieve pressure.
To replace the coolant, use the
coolant recovery tank.
8. When refueling, be particularly
careful first to stop the engine
completely to prevent the fuel
from igniting. Never refuel in the
presence of an open flame or
while smoking.

Other manuals for Cub Cadet 7530

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet 7530 and is the answer not in the manual?

Cub Cadet 7530 Specifications

General IconGeneral
BrandCub Cadet
Model7530
CategoryTractor
LanguageEnglish

Related product manuals