LUBRICATION/FILTERS/FRUIDS
86
Engine Oil Filter
Change Interval Every 200 hours (See NOTE)
NOTE: Change the engine oil filter after the first 50 hours of operation
and then use the regular change interval.
IMPORTANT: Change the oil filter
at the recommended time interval.
Your Dealer has approved genuine
filters. Do not use other type filters.
Change the engine oil filter as follows:
1. Drain the oil from the engine.
See Engine Oil Change in this
manual.
2. Turn the oil filter counterclockwise
to remove. Use a filter wrench,
if necessary.
3. Apply clean oil to the O-ring on the new filter.
4. Install the filter. Turn the filter until the O-ring comes in contact with the
case surface. Tighten the filter an additional 2/3 turns by hand.
IMPORTANT: DO NOT use a filter wrench to install the oil filter. When
the filter is too tight, you can cause damage to the O-ring and filter.
5. Put new oil in the engine. See Engine Oil change in this manual.
INSTALL
REMOVE
To Next Page
Loading...
