Cubicon Single Plus - Page 41

CUBICON Single Plus User Manual
41
 Main > Setting > Function
[1] Filament Check
Turns ON/OFF the filament detection sensor
[2] File Sorting
Sorts file order by name/date
[3] Filter Fan
Turns ON/OFF filter fan
[4] Rear Fan
Adjusts rear fan power with + - button. Flexible adjustment is required based on outside
environment temperature
[5] Tilt Offset
Configures nozzle and bed interval. Narrows nozzle and bed interval with ‘-‘ button
 Main > Setting > Time
Configures time