Wired Touch Panels - User Manual
21© CUE, a.s. | All Rights Reserved.
Using Admin Web
Steps are
1. Connect touch panel to your computer as described in chapter PC Connection.
2. Run Cue Visual Composer on your PC.
3. Open appropriate project in Cue Visual Composer. It’s necessary to have appropriated touch panel properly inserted
and configured.
4. Use tool bar button Final to open Upload and Export Application dialog box.
5. Be sure your touch panel is checked.
6. Use button Export All... to export application and store it in file *.cvca.
7. Run the Internet browser on your PC and type in the same touch panel IP address as you see in Cue Visual Composer
project, window Properties / IP address.
8. Go to page System and check current firmware version. In case there is no actual firmware version in touch panel,
upload firmware version that corresponds to firmware version in the Cue Visual Composer project..
9. Go to page Applications and upload application file *.cvca.
10. Start uploaded application using button Start.
To Next Page
Loading...