F. Fitting and Removing the Lid
• Once the cutting accessory (blade, disc) has been tted, place
the lid directly on the bowl(s). Press on the front and the back of
the bowl to lock the lid in place.
• To unlock the lid, press the release buttons on either side of the
lid interlock. Lift to remove the lid.
Note: The bowl lid adjusts, secures and locks onto the XXL bowl
with or without the XL bowl and/or preparation bowl in place.
G. Fitting and Removing the Pusher
The crescent-moon pusher
• Insert the crescent-moon pusher in the feed tube making sure
the metal rod is touching the locking system of the work bowl
lid. If these do not touch, the motor will not operate.
• To remove the pusher, simply lift and remove.
• The locking system of the crescent-moon pusher, located on the
handle, ensures that you lock the system when you pull on the
locking element. Pressing the locking element will unlock it.
The small pusher with drip feed hole
Thanks to a snug-t system, the drip feed pusher ts into the
crescent-moon pusher. It has a drip-feed system that lets you add
liquids during preparation (e.g.: oil for mayonnaise).
Press here Press here
Pull to lock,
push to unlock
Metal rod
Locking system
To Next Page
Loading...
