5
© Culinary Prestige, 2017
Adjusting the Flame
There are two ways to adjust the ame, using the airow valve or using the gas ow/
child safety lock.
Using the airow valve
1. Once the ame is on, turn the airow control valve in either direction to DECREASE
the ame temperature and intensity.
2. To INCREASE the ame temperature and intensity simply turn the airow control-
valve in the opposite direction as above returning back to the starting
position where the holes on either side line up.
Using the gas ow/child safety lock
1. Before starting the ame, turn the gas ow/child safety control counter-clockwise
(to the left). Turning the gas ow/child safety control all the way to the left will pro-
duce the most intense ame when turned on.
Note: The extent of the ame may not be visible – especially in direct sunlight or a
brightly illuminated environment.
Turning off the Torch
1. To turn the ame off, simple release the ignition button or move the button to off
position if you are in continuous mode.
2. Turn gas ow/child safety control clockwise (all the way to the right) until
next use.
3. Ensure ame is completely extinguished before storing.
4. Keep Torch stored upright in a cool and safe place.
CAUTION: The Culinary Torch becomes extremely hot during and after use. Allow to
cool before storing.
To Next Page
Loading...
Need help?
General