4
© Culinary Prestige, 2017
4. Do not overll. Back spray of liquid gas from ller valve indicates that the torch is
full. Always clean up any butane overspray before attempting to light
the torch.
5. Turn Culinary Torch right side up and let stand for two minutes while gas
stabilizes.
Note: For safety reasons, fuel is not included with the Culinary Torch. Fill only with
high quality butane gas (5x or higher rened highly recommended for
performance). Fill outdoors or in a well ventilated area.
Igniting the Torch
1. Turn the gas ow/child safety control counter-clockwise (to the left).
2. Push the ignition switch a couple of times to circulate the butane from
the gas tank.
3. Flame will ignite.
4. If the torch does not light, then press ignitor button again. If it still does not work,
refer to the FAQ section.
5. For continuous ow operation, simply move the ame lock switch (on the side of
the torch) from the off position to the lock position.
6. When nished, turn the gas ow/child safety control clockwise (all the way) until
next use.
Note: Do not press the ignition button with the burner pointed toward yourself or
anything ammable.
To Next Page
Loading...
Need help?
General