Culligan Aquasential 9 - Page 75

Interconnecting Tubing
1.
2.
3.
4.
5.
NOTE! Make sure all nuts are fastened securely to prevent leaks.
6.
NOTE! Verify that the red flow restrictor is inserted in the dip tube inside the mineral reactivator bottle.
Flow Restrictor
(color = red)
1/4”
Tubing
O-Ring
Mineral
Reactivator Cap
Connect 1/4" tubing
from the solution
bottle to the outlet
side of the solenoid
that isn't marked.
11.5
Cut hole in brine well
cover and then again in
the brine tank sidewall.
Cover
Manual de Usuario Culligan Smart Softener. Página 75 de 107 Pure Water Technology (2023) Todos los derechos reservados
atencion@purewater.mx purewater.mx 81-1642-7777