Culligan Mark 100 Owner's Guide

Thank You
AND WELCOME TO YOUR NEW WORLD OF BETTER LIVING
WITH CULLIGAN WATER.
The Culligan
®
Mark 100 water softeners are tested and validated by WQA against ANSI/NSF Standard 44 for
the effective reduction of the calcium and magnesium, along with Barium and Radium 226/228*.
If this is your first experience having soft, conditioned water in your home, you’ll be amazed at the marvelous difference it makes.
We promise that you’ll never want to be without it again.
Congratulations, too, on selecting one of the “first family” of water conditioners in the prestigious Culligan
Mark Series. With Culligan’s
many years of knowledge and experience in water treatment, you can be confident that the model you selected has
been designed and engineered to provide years of service with a minimum of care and attention.
Some localities have corrosive water. A softener cannot correct this problem and so its printed warranty disclaims liability for corrosion of
plumbing lines, fixtures or appliances. If you suspect corrosion, your Culligan Dealer has equipment to control the
problem.
SODIUM INFORMATION: Water softeners using sodium chloride for regeneration add sodium to the water. Persons who are on
sodium restricted diets should consider the added sodium as part of their overall sodium intake.
* Verified utilizing hardness surrogate per ANSI/NSF Standard 44.

Culligan Mark 100 Specifications

General

Brand	Culligan
Model	Mark 100
Category	Water Dispenser
Language	English