Culligan MEDALLIST SERIES Installation And Operation Instructions With Parts List

The service mode allows one to view the number of regenerations in the past 14 days, the total number of regenerations the
control has cycled through and the number of days since the last regeneration.
To enter the service check mode, follow these steps:
1. From the Blank display:
2. Press the “-” key. The display will blink “14dY” for 3 seconds and then display
the number of regenerations that have occurred in the last 14 days.
3. Press the “-” key. The display will blink “totL” for 3 seconds and then display the
total number of regenerations this control has cycled through.
4. Press the “-” key. The display will blink “daYS” for 3 seconds and then display
the number of days since last regeneration.
Note: Pressing the “+” key at any time brings back to manual cycling. Pressing
“Status” will Exit the programming menu.
93
5
2
Service Check
19 Culligan Medallist Series
®
Water Filters

Culligan MEDALLIST SERIES Specifications

General

Type	Water Softener
Flow Rate	Up to 12 gallons per minute
Resin Type	High-capacity resin
Dimensions	Varies by model
Weight	Varies by model
Tank Material	Fiberglass