ii Culligan® Premium Cooler
ii Cat. No. 01021717
Key Pre-Delivery Activities
CAUTION! The cooler and the water treatment equipment must be properly prepared before
the system is delivered to the customer.
Verify Premium Cooler Reverse Osmosis System Configurations
Premium RO—see Appendix A, Figure 12 on pages 32–33.
• Uses: sediment filter, carbon block filter and RO 30 cartridges in three (3) E-Z Change heads with inline post car-
bon filter. Premium units use an internal storage reservoir that requires no automatic shut-off valve.
• For detailed instructions about Aqua-Cleer
®
components please refer to the complete Installation, Operation and
Service Manual, Cat. No. 01020219.
Premium LC-100 RO—see Appendix B, Figure 16 on pages 34–36.
• Uses: Preferred Series 250 Filter, LC-100 RO, and inline post carbon filter. Premium Cooler units use an internal
storage reservoir that requires no automatic shut-off valve.
• For detailed instructions about Aqua-Cleer
®
LC components please refer to the complete Installation, Operation
and Service Manual, Cat. No. 01882074.
Premium AC50 RO—see Appendix C, Figure 19 on page 37–38.
• Uses: AC50 and inline post carbon filter. Premium Cooler units use an internal storage reservoir and the AC50
includes an internal automatic shut-off valve and check valve.
• For detailed instructions about AC 50 components please refer to the complete Installation, Operation and Service
Manual, Cat. No. 01018587.
CAUTION! All RO Membranes will require a 24-hour flush to drain. All flushing of mem-
branes and filters must be done with chlorine-free, filtered, softened water.
To Next Page
Loading...
Need help?
General
