EasyManua.ls Logo

Cunill Classic TRANQUILO - Grinding coffee beans; Obtaining a Measure of Ground Coffee; Machine Air Noise; Unpacking

Cunill Classic TRANQUILO
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Turn on the coffee grinder using the On/Off
switch (11). The beans will pass through the
grinder and the ground coffee will fit the
ground coffee feeder.
When the ground coffee feeder (8) is full,
stop the coffee grinder using the On/Off
switch (11).
ONLY FOR MODELS WITH AUTOMATIC
STOP FEATURE: After starting the coffee
grinder using the On/Off switch (11),
the machine stops automatically when
the ground coffee feeder (8) drops to a
certain level, the coffee grinder starts up
automatically, refills the feeder (8) and shuts
down automatically once the feeder is full.
ONLY IN THE BI-MOTOR MODELS:
Operate also automatically but in them the
machine starts up automatically when you
have taken out from the doser (8) the amount
of 8 coffees, in this moment it will starts up
automatically again.
14
Grinding coffee beans
a) Place the coffee-holder of the coffee
machine on the Seal-saver (12), located right
below the feeder’s ground coffee outlet (14).
b) Pull the feeder handle (14) towards you to
obtain a single measure. Release the handle
for it to return to its position.
c) Place the coffee-holder of the coffee
machine under the ground coffee press (10)
and press upwards to pack the ground coffee.
If you want to keep the feeder (8) full at all
times (although this is not necessary), turn
on the grinder every time you remove a
measure and turn it off when the feeder (8)
is full. (Remember that
this operation is
automatic in models
with the automatic stop
feature).
15
Obtaining a Measure of Ground
Coffee
The air noise value of CUNILL coffee
grinders was estimated based on measuring
noise levels in identical machines during the
grinding process.
The continuous weighted “A” equivalent
acoustic pressure level at the worksite for
different coffee grinders is as follows:
MODEL - ”Classic” dB-(A)
-Tranquilo .................. 77
-Tranquilo-2............... 77
-Brasil ........................ 77
-Tauro ........................ 77
-Full-metal ................. 79
-Space ........................ 79
-Marfil ........................ 79
-Michigan .................. 80
MODEL-”Silencer” dB-(A)
-Jamaica ................... 63
-Uganda ................... 63
-Movie ...................... 63
-Nobel ...................... 63
-Hawai ..................... 65
MODEL-”Electronic dB-(A)
-Rumba......................63
-Salsa.........................63
09
Machine Air Noise
Before fully unpacking your coffee grinder,
make sure that the model and colour
indications marked on the box match the
model that you have selected. If not, please
contact your dealer.
Carefully remove the
contents from the box
and make sure the
coffee grinder has not
been damaged during
transportation.If you
observe any damage,
please inform your dealer
without delay.
If you suspect that the
coffe grinder or any of
its parts are damaged of
deteriorated,DO NOT USE THE DEVISE.
Contact CUNILL’s Technical Service
inmediately or get in touch eith MOLCUNILL
authorized technical staff.
Before using the
machine, remove all
wrapping and make sure
it is completely clean.
Take special pains to
make sure that plastic
bags and metal staples
are kept out of the reach
of children to prevent
possible accidents.
Please, be environment - friendly. Do not
dispose of the packing materials any which
way. These can be recycled - both the
plastic bag used to wrap the coffee grinder
and the cardboard box itself are made
with recyclable materials. Please check the
related legislation in your country.
10
Unpacking

Related product manuals