33
User-Adopted Safety Measures
Although CUNILL coffee grinders are
equipped with all the safety devices and
mesures necessary for completely safe use,
in order to prevent possible harm it is very
important that the user follow the safety
measures indecated below:
a) Never handle or operate the coffee grinder
while barefoot.
b) Never handle or operate the coffee grinder
with wet or damp hans or feet.
c) Avoid wetting the outer surface of the coffee
grinder. If it does get wet furing operation,
or even when not operating, unplug it
immediately and dry it thoroughly.
d) Avoid the penetration of solid objects in
the interior of the coffee grinder. If any solid
or liquid accidentally falls into the machine
during operation or when stopped, unplug
the coffee grinder immediately and have it
checked by CUNILL’s Technical Service.
e) In general, never turn on the coffee
grinder with any moving parts not correctly
in place.
f) Always put the hopper lid (1) in place (on
top of the hopper (2) after filling the hopper
with coffee beans and before turning on the
coffee grinder.
g) Never run the coffee grinder without the
hopper (2) correctly in place and attached
by lockscrews (3).
h) Never run the coffee grinder
without the feeder lid (7) correctly in
place.
i) In general, coffee grinders should not be
run continuously for longer than 30 minutes
at a time (check the specifications plate
attached to your coffee grinder).
j) While filling the hopper (2), make sure
no objects (necktie, scarf, hair, jewellery...)
accidentally fall into the hopper or the
adjustment platen (4).
k) Always follow the instructions in this
manual for all processes involving operation,
cleaning and maintenance.
l) To unplug the power cord from the mains
outlet, grasp the plug itself; never pull on the
cord.
m) Like with any other machine, make sure
the machine is not operated by anyone
who has not read this manual carefully
and thoroughly, or who is not prepared to
make appropiate use of the device, such as
children.
05
For you Safety and Good Operation
of the coffee grinder
CUNILL coffee grinders are designed to
provide safe, durable and reliable operation
if used correctly. Therefore, it is VERY
IMPORTANT to read this instruction manual
carefully before using the coffee grinder for
the first time. Follow each and every item
in the order in which they appear, and pay
even more attention to warnings regarding
installation, use, maintenance and cleaning
especially those sections marked with the
symbol:
as they refer to
opertions which may be
HAZARDOUS TO THE
USER if not perfomed
correctly.
If you fail to follow the
instructions, incorrect
use may cause bodily harm or material
damage.
The manufacturer may not be held liable for
any transformation, regulation, alteration
and/or modification to caffee grinders not
made by qualified personnel. These may
lead to material damages or bodily harm.
Although the manual which you are
reading right now is written in your contry’s
language, we also have this manual in all
official EC languages. If you wish to obtain
one of these, or a translation into any other
languages, please contact our Commercial
Department, which will gladly provide it to
you. (You will find our address and telephone
number in this manual).
Store this manual in a safe place for future
reference.
06
General Description
All of the machines presented in this manual
are coffee grinders powered by electric motor
and destined for commercial use.
TRANQUILO-TRANQUILO-2 Model
H: 380mm L: 280mm W: 140mm Wei:10Kg
Number of motors: 1
Voltage:230v-110v-Frequency:50Hz-60Hz
Phases: 1(single)-Amperage: 1,15 A-2,53A
Power:0,10/270
Condenser: 10nf-450v - 40nf-400v
Speed:1300-1650 Protection degree:IP21
Maximum continuous Service Time:30 min.
Motor Equiped with Thermal Protector
Tempered Steel Grinding Wheels, 60mm.
Duration of Grinding Wheels:500kg Cof.B.
Hopper Capacity: 1/2Kg.
Dispenser Capacity: direct to the coffee-holder
of the Coffee Machine
Dispenser adjustment: M/ Elect.Board(Tra).
Dispenser Adjustment: 5Gr - 12Gr.(Disp.)
Minimum Time in Repose: 10 min.
07
Technical Specifications
To Next Page
Loading...
