Need help?Do you have a question about the Cuppon CSD 150 and is the answer not in the manual?
General| Door weight | 150 kg |
|---|---|
| Power Supply | 24 V DC |
| Current Consumption | 1.5 A |
| Protection Class | IP54 |
| Holding Force | 1500 N |
| Stroke Length | 300 mm |
Details the safety photocell system detecting obstacles using infrared signals for safety and control.
Explains the internal radar's function in detecting movement inside the door mechanism for automatic operation.
Details the external radar's role in detecting exterior movement and activating the door.
Describes how the system uses curtain photocell microwave radar to detect obstacles and movement for door operation.
Explains how door opening and closing movements are controlled via Open/Close inputs and buttons.
Details external equipment like SNRF, SDA, and SELS that can connect to the system's Open-Close input.
Explains how the position switch selects door functions like Installation, Positioning, Always Open, and Always Close.
Describes methods for controlling the door with remote control using the SN-12 plus receiver connected to the position switch.
Configuration for safety photocell operation via DIP switch settings.
Adjusts the door closing delay time using DIP switch settings.
Configures the crushing test behavior during door operation with DIP switch.
Controls motor lock status (closed/opened) through DIP switch settings.
Details the function of various LEDs on the microprocessor unit, indicating system status.
Lists and explains fault codes indicated by the LD9 LED, helping diagnose system errors.
Provides essential safety precautions for installation, operation, and maintenance of the automatic door system.
To Next Page