DKC600 (U) & DKC600 (U)Y SLIDING GATE OPERATOR USER’S MANUAL
The gate operator is installed with a thermal protector, the motor is only designed to work for
less than 15 minutes. If is runs continually for an extended period of time, the thermal protector
will switch off the motor automatically in case of the temperature is higher than 120°C and
switch on the motor when the temperature is lower than 85°C±5°C.
11. Maintenance
Keep operator clean at all times.
Ensure the operator is well earthed, and correctly terminated.
Regularly grease the wheels and axles to ensure the gate moves smoothly.
To Previous Page
Loading...
