Cupra BORN - Page 20

Driver informationControl lamps
19
Driver information
Control lamps
Control and warning lamps
The warning and control lights can be lit indi-
vidually or in combination and serve as a warn-
ing, to indicate the presence of an anomaly or
to warn of the activation of certain functions.
Some turn on when the ignition is switched
on and have to be switched o after a certain
period of time.
The control lamps that light up on the light
control are explained in chapter ››› page 112,
Lights.
WARNING
If the warning lamps and messages are ig-
nored, faults may occur in the vehicle, it may
stall in traic, or accidents and serious inju-
ries may occur.
•
Never ignore the warning lamps or text
messages.
•
Stop the vehicle safely as soon as possible.
Sym-
bol
Meaning
Stop driving!
Central warning lamp ››› page 26
Sym-
bol
Meaning
Fasten your seat belt ››› page 42
Deep discharge of the high-voltage
battery ››› page 83
Electronic parking brake on
››› page 189
Stop driving!
Fault in the brake system
››› page 151
Stop driving!
The electromechanical brake servo
is not working ››› page 153
Stop driving!
Fault in the brake system
››› page 190
Stop driving
Brake uid level low ››› page 287
Take control of the vehicle and be
ready to brake! ››› page 162
Stop driving!
Fault in the motor coolant system
››› page 286
Sym-
bol
Meaning
Stop driving!
Steering anomaly ››› page 148
Stop driving!
Fault in the high voltage system
››› page 83, ››› page 147,
››› page 272
Stop driving!
12 volt battery ››› page 291
High-voltage battery empty - Driv-
ing not possible ››› page 141,
››› page 142
Health risk! Open the windows!
CO
2
concentration too high
››› page 134
Collision warning ››› page 170
Take control of the steering imme-
diately ››› page 180
Central warning lamp ››› page 27