High-voltage battery
●
Unplug the char
ging cable and let it cool
do
wn.
●
If the error occurs again, seek professional
assistance.
If charging continues with a lower charging
current, warning lamp
4
lights up in red in
addition t
o the st
atus indicator. The charging
cable must be allowed to cool down for a
while. The charging current automatically in-
creases again.
Fault display
If the red warning light
4
flashes or turns on
without one of the indicat
or lamp
s
›››
Fig. 195
1
,
2
or
3
also turning on con-
tinuously on the st
at
us indicator, there is a
fault.
Display
›››
Fig. 195 Meaning
1
flashes,
4
on or
flashing
Failure in the power supply.
2
flashes,
4
on or
flashing
Failure in the protection de-
vice.
3
flashes,
4
on or
flashing
Failure in the vehicle.
The charging process pauses or is cancelled.
●
Check the instructions located on the back
of the pr
ot
ective devices.
●
Seek professional assistance if the fault
persists.
Note
If there is any other mains connection dur-
ing the charging process, or if the vehicle is
right next to the high voltage cables, charg-
ing from an electrical socket is not possible
in some cases. Additional mains connec-
tions:
●
Connecting a 12 volt battery charger.
●
Contact with a work tool connect to the
mains, such as a vehicle lift.
311
To Next Page
Loading...
