Operation
●
Oil change service and inspection
due!
C
onsult a service notification
With the ignition s
witched on, the engine off
and the vehicle at a standstill, the current
service notification can be read:
Check the date of the current service on the
infotainment system
●
Press / > Settings.
●
Select the Applications and services
menu option to display information about
the services.
Checking the date on the digital instrument
panel
●
The date of the service can only be read
through the Service menu
›››
page 69 .
Resetting service interval display
If the service was not carried out by a speci-
alised CUPRA dealer or any dealer in the
SEAT network, the display can be reset as
follows:
●
The service interval display can only be re-
set through the Service menu
›››
page 69 .
Do not restart the indicator between the
service intervals, otherwise the information
displayed will be incorrect.
If the oil change service is reset manually,
the service interval display changes to a fixed
service interval, also in vehicles with Flexible
oil change service.
Note
●
The service message disappears after a
few seconds, when the engine is started or
when the button is pressed on the multi-
function steering wheel.
●
In vehicles with the LongLife system in
which the battery has been disconnected
for a long period of time, it is not possible to
calculate the date of the next service.
Therefore the service interval display may
not be correct. In this case, bear in mind
the maximum service intervals permitted
›››
page 346.
●
If you reset the display manually, the next
service interval will be indicated as in vehi-
cles with fixed service intervals. For this
reason we recommend that the service in-
terval display be reset by an authorised
dealer.
Instrument cluster operation
Introduction
With the ignition switched on, it is possible to
r
e
ad the different functions of the display by
scrolling through the menus.
The multifunction display can only be con-
trolled from the buttons on the multi-func-
tion steering wheel.
Some menu options can only be read when
the vehicle is at a standstill.
WARNING
Distracting the driver in any way can lead to
an accident and cause injuries.
●
Never use the menus on the instrument
panel display while the vehicle is in motion.
Note
After loading or changing the 12-volt bat-
tery, check the system settings. If the pow-
er supply is interrupted, the system settings
might be incorrect or deleted.
80
To Next Page
Loading...
