Control instruments and warning lamps
Operation using the multifunction
steering wheel
Fig. 60
Right side of the multifunction steering
wheel: buttons for using the instrument cluster’s
menus and information displays (depending on
versions).
As long as a priority 1
›
›
›
page 71 warning is
active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button of the multifunc-
tion steering wheel
›››
Fig. 60 .
Select a menu or an informative display
●
Switch the ignition on.
●
If a message or vehicle symbol is displayed,
press the button
›››
Fig. 60 ; if necessary,
several times.
●
To change menus, use buttons or
›››
Fig. 60.
●
To open the menu or the information dis-
played, press the button
›››
Fig. 60 or wait
a few seconds until the menu or the informa-
tive display opens automatically.
Changing menu settings
●
In the menu displayed, turn the right
thumbwheel of the multifunction steering
wheel
›››
Fig. 60 until the desired option of
the menu is highlighted. The option appears
framed.
●
Press the button
›››
Fig. 60 to make the
required modifications. A mark indicates that
the system or function is activated.
Back to menu selection
Press the button or
›››
Fig. 60 .
Button for the assistant systems*
Fig. 61
On the turn signal and main beam lever:
button for assistant systems (depending on ver-
sions).
Fig. 62 Left side of the multifunction steering
wheel: button for assistant systems (depending on
versions).
With the turn signal and main beam head-
light le
v
er button, you can activate or deacti-
vate the assistant systems displayed in the
Assistants menu .
Activating or deactivating an assistant sys-
tem using the turn signal lever and main
beam headlight
●
Briefly press the
›››
Fig. 61
1
button to
open the Assist
ants
menu.
●
Select the assistant system and activate or
deactivate it
›››
page 80 . A mark indicates
that assistant system is switched on.
●
Next, confirm the selection by pressing
the button on the multi-function steering
wheel.
»
81
To Next Page
Loading...
