Transporting children safely
Fitting a child seat using the seat belt
●
Set the height of the seat belt such that it
adapts t
o the child se
at naturally, without
twisting. The lowest position of the seat belt
height regulator must be used with rear-fac-
ing child seats.
●
Put the seat belt in place and pass it
through the child seat according to the in-
structions of the child seat manufacturer.
●
Make sure that the seat belt is not twisted.
●
Insert the latch plate into the seat's buckle
until you hear the engagement click.
WARNING
When travelling, children must be secured
in the vehicle with a restraint system suita-
ble for age, weight and size.
●
Read and always observe information and
warnings concerning the use of child seats
›››
page 33.
41
To Next Page
Loading...
