7
General information
Tools and Materials
Other tools
• Strong shovel
• Wrecking bar
• Claw hammer
• Circular saw/jig saw
• Mastic gun
• 5” Grinder + stone blade for cutting trims
• Cure It Extension Pole
• Cure It Sanding Head
• 40 Grit aluminium oxide paper
• Soft and stiff sweeping brushes
• Visqueengroundsheet(incaseofrain)
• Nail gun
Other materials
• 19mm x 38mm treated tile batten
• OSB3 decking board (2400x600x18mm T&G)
• 63mm paslode nails (all nails should be galvanised and at least 60mm
long and should be ringshank nails, screw or better)
• 13mmgalvfeltnails(forxingtrims)
• Leadsealant(forsealingashingsintowallonly)
• Decorators wipes
• Rubbish bags
• Slate granules
Personal protection equipment
• Eyewash station
• Protective goggles
• Disposable gloves
• Suitable footwear
• Resin resistant overalls
• P3 Dust Mask
• Carbonltermask(optional)
Cure It roong materials
• CureItRoongResin
• Cure It Topcoat This is available in Graphite Grey as standard (BS 00 A 13) or a selection of
pre-pigmented colours
• GRP Edge trims
• Cure It Reinforcement Mat This is available in 2 weights: 450g/m
2
for most roofs and 600 g/m
2
for applications
where the roof will be subjected to heavy foot traffic (i.e. a walkway or balcony.)
• Bandage
• Cure It Hardener Hardener can be supplied in different strengths to compensate for seasonal
variations in temperature
• Acetone
• Trim Adhesive
• FinishingTissue Thisisusedtoachieveahighqualitynishondetailedareas
Roong tools
• Cure It mixing bucket For easy measurement of materials and hardener addition
• Brushes Required for detail work
• 70mm + 140mm rollers These can be extended with a Cure It extension pole
• Consolidating rollers/paddle roller These can be extended with a Cure It extension pole
• Hardener safety dispenser This is an essential tool for safe hardener addition