Need help?Do you have a question about the Currie tech E-FolderCTI-B-30 and is the answer not in the manual?
Important information for safe operation, maintenance, and adjustments.
Warranty void if serviced by non-authorized dealers; use only original parts.
Risks associated with improper use and general safety advice.
Guidelines for using electric power and maintaining tire pressure for optimal performance.
Contact information for Currie Technologies Inc. for customer support.
Welcome message and overview of the electric bicycle's technology and benefits.
Emphasis on reading the manual for setup, maintenance, and riding.
Identification of key components of the E-Folder Electric Bicycle CTI-B-300.
Advice on adjusting to the electric bicycle's weight and handling.
Guidelines for safe riding, including visibility and anticipating hazards.
Instructions on how to use the electric throttle and pedal assist.
Recommendations for cleaning the bicycle after riding.
Guidance on effective and safe braking techniques.
Advice on handling, mounting, and initial riding conditions.
Specifies that the bicycle is for paved surfaces and not off-road use.
Precautions for riding in wet conditions and reduced traction.
Explanation of gears, pedaling cadence, and shifting while using electric power.
How to activate and use the electric power via throttle and power switch.
Describes riding modes: human power only or combined electric and human power.
Tips for maximizing battery range and performance through pedaling and power usage.
Advantages of using both human and electric power for transportation and exercise.
Instructions for using the battery charger and understanding indicator lights.
Safety precautions for using the battery charger and handling the battery pack.
Details about the sealed lead acid battery pack and handling battery acid.
Guidance on when to charge the battery pack, no charge memory.
Explanation of the battery fuse and how to check if it's blown.
General inspection guidelines for the CURRIE ELECTRO DRIVE system.
How to inspect and care for the throttle unit and cable.
Importance of ensuring the battery pack is securely fitted before riding.
Procedure for checking and replacing the battery fuse.
Guidance on inspecting the motor for secure mounting and cable condition.
Maintenance schedule and lubrication for the propulsion unit chain.
Instructions for adjusting the motor chain tensioner.
Maintenance for the Pedal Torque Enabler magnets and sensors.
Information regarding assembly and modifications of the CURRIE ELECTRO DRIVE.
Step-by-step guide for removing the rear wheel.
Step-by-step guide for installing the rear wheel.
Procedure for safely removing the battery pack from the bicycle.
Procedure for securely installing the battery pack onto the bicycle.
Guidance on operating the cantilever braking system and proper application.
Reinforces safe braking practices and releasing the throttle.
How to use the grip shift controls for changing gears and selecting appropriate gears.
Advice on shifting gears while using electric power.
Guidelines for ensuring a proper and safe frame fit for the rider.
Instructions for adjusting the handlebar height and position for comfort.
General advice for assembling the bicycle if needed.
How to adjust the saddle height and angle for comfortable pedaling.
Routine checks for damaged parts, fork alignment, and component positioning.
Maintaining brake shoes, checking for wear, and cleaning rims.
Inspecting control cables for stretch, damage, or kinks.
Guidelines for inspecting the front fork for damage and replacement.
How to adjust and maintain the headset bearings for smooth operation.
Inspecting the front wheel, hub sealing, and spoke tension.
Maintenance for cranks, chainrings, and pedals, including tightening crank bolts.
Inspecting the rear wheel, hub, spokes, and ensuring proper seating.
Adjusting handlebars for comfort and checking handlebar grips for wear.
Checking chain for damage, stretch, and regular lubrication.
Adjusting and caring for the rear derailleur to ensure smooth shifting.
Maintaining proper tire inflation, seating, and checking for wear.
Checking the frame for cracks or damage that could compromise safety.
Essential pre-ride checks for bicycle safety and component integrity.
Importance of knowing and following local traffic laws and ordinances.
Advice on staying alert, observing hazards, and being visible to motorists.
Overview of instructions for component adjustment, maintenance, and repair.
A comprehensive list of tools needed for bicycle maintenance and repair.
Step-by-step instructions for assembling the bicycle frame.
Instructions for folding and unfolding the handlebar assembly.
Steps for folding the bicycle frame for storage or transport.
Instructions for assembling and installing the bicycle seat.
How to adjust the seat post height and secure it properly.
Instructions for locking and securing the folding pedals.
Step-by-step instructions for repairing a flat front tire.
Procedure for repairing a flat rear tire, considering the propulsion unit.
Adjusting handlebar height, angle, and checking for tightness.
Instructions for removing and installing pedals correctly.
Emphasizes the importance of the brake system for safe operation.
Steps to release the brake cable for repairs or pad replacement.
Procedure for reinstalling the brake cable into the bracket.
Guidance on adjusting brakes for proper clearance and function, including safety.
Explanation of how the derailleur system changes gear ratios.
How to use the grip shift controls for front and rear gears.
Detailed steps for adjusting the rear derailleur for optimal shifting.
Procedure for adjusting cables to take up slack caused by stretching.
Guidelines for adjusting and lubricating bearings, and when to seek dealer service.
List of bicycle parts that require regular lubrication.
Recommendations for assembly, tuning, and repair by authorized dealers.
Importance of service records and proof of purchase for warranty claims.
Overview of different service intervals (pre-delivery, initial, standard, major).
A table outlining service requirements for various bicycle components at different intervals.
Comprehensive technical specifications for all bicycle components.
Details of the limited warranty coverage for the bicycle and its components.
Conditions and actions that void the warranty or are excluded from coverage.
Contact information for warranty service and support.
General| Wheel Size | 20 inches |
|---|---|
| Brakes | V-Brakes |
| Foldable | Yes |
| Top Speed | 15 mph |
| Type | Electric Bicycle |
| Motor | 250W |
| Battery | 24V 10Ah |
| Frame Material | Aluminum |
| Gears | 6-speed |
To Next Page