EasyManua.ls Logo

Curt Manufacturing A25 - User Manual

Curt Manufacturing A25
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
INSTALLATION INSTRUCTIONS
Provide this manual in its entirety to the end-user. Read
and understand instructions before using this product.
Fully instruct and demonstrate the operation of this 5th
wheel hitch to the end user. Include the importance of
observing all warnings contained herein, including warning
labels on 5th wheel hitch mid section. Serious injury or death
may result if the warnings above are not observed.
To avoid serious injury, do not expose hands, body parts
or clothing between the truck and trailer or the truck's bed
sides and trailer. Extreme care should be observed to avoid
serious injury to self, property and observers.
WARNINGS
FORD OEM COMPATIBLE 5TH WHEEL LEGS
Provide this manual, in its entirety, to the end-user
PARTS LIST
Item# Qty Description
1 2 Leg weldment
2 4 Bolt, locking
3 2 Handle, left
4 2 Handle, right
5 4 Flat washer
6 4 Castle nut
7 4 Puck
8 2 Safety pin, 3/8" x 1 3/4" long
9 4 Cotter pin
1
3
4
9
2
7
5
6
8
Figure 1
Never exceed the rated towing capacity of your vehicle.
Trailer and contents combined must not exceed tow vehicle,
hitch and/or trailer tow ratings. Exceeding rated capacity
may result in separation. Exceeding rated capacity may
result in damage to 5th wheel hitch, towing vehicle, trailer
and or cause serious injury or death.
Never position yourself or others under the trailer's kingpin
area (danger zone) during coupling and uncoupling. Improperly
coupled trailers can separate and drop without notice.
PAGE 1 • 16017-INS-RB • 1.800.798.0813 • NEED ASSISTANCE?CURTMFG.COM
Question and Answer IconNeed help?

Do you have a question about the Curt Manufacturing A25 and is the answer not in the manual?

Summary

Parts List

Warnings

General Safety and Operation Warnings

Read and understand all warnings to avoid serious injury, death, or property damage.

Assembly Instructions

Prepare and Loosen Components

Open lock handles and loosen castle nuts to achieve 1/8" clearance.

Attach and Secure Legs

Loosely assemble legs to the head, then tighten bolts to 100 ft-lbs.

Adjust Tension and Finalize Assembly

Adjust castle nuts, re-install cotter pins, and secure handles with safety pins.

CURT Warranty Information

Warranty Limitations and Exclusions

CURT's liability is limited to repair/replacement, excluding incidental damages.

Curt Manufacturing A25 Specifications

General IconGeneral
BrandCurt Manufacturing
ModelA25
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals