To Next PageTo Next PageHow to troubleshoot no trailer brakes on my curt Controller?
If you have no trailer brakes (pedal or manual), it could be due to: * A mis-wired 7-way connector. * Improper or corroded trailer wiring. * A weak or missing ground. In any of these cases, confirm the vehicle and trailer 7-way connections.
What causes reduced braking power on my curt Controller?
Reduced braking power on manual override or brake output can be caused by: * A weak or missing ground. * Improper max power or sensitivity settings. * Improper or corroded trailer wiring. Confirm vehicle and trailer 7-way connections. Also, check Bluetooth and application settings and increase max power or sensitivity settings.
Why are my trailer brakes on all the time with my curt Controller?
If the trailer brakes are on all the time and the LED is red, it's likely due to a mis-wired 7-way trailer connector. Confirm the vehicle and trailer 7-way connections.
Why is my curt Controller app signaling 'overload'?
If your app signals 'overload', it means the trailer brakes are overloaded. You should reconnect the trailer connector, confirm the vehicle's 7-way connections and wiring, and check the trailer brake wiring for short circuits.
What to do if my curt ECHO 51190 shows a flashing red LED?
A flashing red LED on your CURT Controller indicates a few potential issues: * There might be contamination in the trailer plug socket, so check for a clean and dry trailer plug. * There could be a short in the trailer brake wiring, requiring you to locate and correct the short. * It might be an accelerometer error; try unplugging the brake controller and plugging it back in. * There might be a short or overload in the trailer brakes, so troubleshoot the trailer brake circuit per the brake manufacturer's instructions.
How to fix a curt Controller app signaling 'low voltage'?
If the app signals 'low voltage', the cause is likely low battery voltage. Check the vehicle battery and replace it if needed. Also, confirm the vehicle's 7-way connections and wiring.
Why won't my curt ECHO 51190 connect to mobile devices?
If you're unable to connect to mobile devices, several factors could be at play. First, check the Echo LED status for power and ensure there's no issue with power to the brake controller or ground on the vehicle's 7-way. Input the PIN from the label or quick reference card. Enable Bluetooth or grant necessary permissions. Ensure your smartphone is compatible. If issues persist, select the trailer profile, tap the Echo device name, and then tap the trash can icon to remove it. In your OS settings, go to Bluetooth connections and 'forget the device'.
What to do if my curt ECHO 51190 has no response on manual override?
If there's no response on manual override or brake output, it could be due to a mis-wired 7-way connector, improper or corroded trailer wiring, no or intermittent power to the controller, a weak or missing ground, or a wireless connectivity error. Confirm vehicle and trailer 7-way connections. Also, check Bluetooth and application settings.
What to do if curt ECHO 51190 has no trailer brakes and app signals disconnect?
If you have no trailer brakes (pedal or manual) and the app signals 'disconnect', it indicates a loss of trailer connection, potentially due to an unplugged connector or bad wiring. Confirm the vehicle and trailer 7-way connections.
General| Brake Type | Electric |
|---|---|
| Operating Voltage | 12V |
| Installation | Plug-and-play |
| Vehicle Connector | 7-way RV Blade |
| Bluetooth Connectivity | Yes |
| Smartphone App Control | Yes |
| Braking Modes | Proportional |
| Diagnostics | Yes |
| Overload Protection | Yes |
| Short Circuit Protection | Yes |
| Connector Type | 7-way RV Blade |
| Color | Black |
| Material | Plastic |
| Product Type | Brake Controller |
| Trailer Connector | 7-way |
| Current Rating | Up to 3 Axles |
| Wire Gauge | Not applicable |
Guides users on how to download and install the necessary mobile application for the device.
Details the process for enabling Bluetooth and pairing the mobile device with the Echo® brake controller.
Describes the steps to create and save new trailer profiles in the mobile app.
Explains how to switch between and activate different saved trailer profiles.
Outlines the procedure for editing or removing existing trailer profiles.
Explains how to use the manual brake activation feature via the mobile app.
Describes the visual indicator for current brake output levels displayed in the app.
How to adjust the maximum power level applied to the trailer brakes.
How to adjust the responsiveness and aggressiveness of the trailer brakes.
Explains how vehicle hazard lights can affect trailer brake pulsing.
