30
1313 Handheld Programmer Manual (18 MARCH 2010)
1 5 M A R C H 2 0 1 1 D R A F T
Date & Time
This folder contains eight items.
Show Date/Time in header. The date and time are typically displayed
at the top of the Main Menu screen. However, if you do not use batteries in
the handheld programmer and there is no real-time clock in the connected
control system, you can set this item to “Off,” since it would not provide ac
-
curate information.
12h/24h. Here you can select the format used to display the time.
Date Format. Several options are available: the year appearing first or
last, and the month appearing before the day or the day appearing before the
month.
Year
, Month, Day, Hour, and Minute allow you to set the date and the
time for your time zone.
About
This folder contains information about the programmer similar to what is shown
in the System Info menu for each of the modules in the control system: model
number, software version, hardware version, serial number, etc.
Softkeys available in HHP Settings menu
The “Save” softkey allows you to save your settings to a new .hps (handheld
programmer settings) file. If there is an SD card in the programmer, the settings
will be saved to the SD card; if there is no SD card, the settings will be saved
to the programmer’s flash memory.
After you save your settings to a new .hps file, you can then copy them
to another 1313 programmer.
When you adjust HHP settings without saving to a new .hps file, those
settings will be in effect unless you select “Restore.”
“Restore” allows you to restore the previously saved .hps file.
10 — HHP SETTINGS MENU
To Next Page
Loading...
Need help?
General