Curtis Instruments F Series User Manual

4 — PROGRAMMABLE PARAMETERS
pg. 33
Return to TOC Curtis AC F4-A Motor Controller – August 2020
PARAMETER MENU INDEX
Table 15 Programmable Parameters Menus: Curtis Integrated Toolkit
TM
/1313 HHP
CONTROL MODE SELECT............. p.40
— Speed Mode Express..........p.40
— Application Setup...............p.48
— Controller Setup.................p.85
— AC Motor Setup.................p.109
CONTROL MODE SELECT.............p.40
— Speed Mode........................p.41
— Application Setup................p.48
— Controller Setup..................p.85
— AC Motor Setup.................p.109
Application Setup: menu index Controller Setup: menu index AC Motor Setup: menu index
APPLICATION SETUP....................... p.48
— Throttle
— Brake
— Can Interface
— Can Interface 2
— Battery Setup
— Main Contactor
— EM Brake Control
— Emergency Reverse (EMR)
— Interlock Braking
— Vehicle
— Max Speed Supervision
— Travel Control Supervision
CONTROLLER SETUP................. p.85
— Inputs
— Analog 1-31
— IO Assignments
— Controls
— Switch Status
— Coil Drivers
— Outputs
— Drivers 1-7
— External Supplies
— Current Limits
— Power Limits
AC MOTOR SETUP........................... p.109
— Induction Motor (ACIM)
— Field Weakening
— Limited Operating Strategy
— Characterization Tests
— Quadrature Encoder
— Encoder Fault Setup
— Temperature Sensor

Curtis Instruments F Series Specifications

General

Brand	Curtis Instruments
Model	F Series
Category	Controller
Language	English