Curtis 3301T - Access Control and Authorization

2 — USING THE 3301T
Curtis Model 3301T Digital Instrumentation – September 2021
Return to TOC
pg. 6
POWER-ON 3301T PASSWORD OR ECS AUTHORIZATION
e 3301T can be congured so that only authorized users can access the device. ere are two
methods for authorizing access:
• Enter a password on the 3301T keypad.
• Log onto the Curtis Electronic Code Switch (ECS).
Note: e ECS ensures that only authorized users can operate a vehicle. Users log on by entering a
user ID and PIN code or by swiping an RFID tag. For more information, see the Input Devices page
on the Curtis Instruments website.
e following topics describe the two methods.
Power-On 3301T Password
If the 3301T is congured to require a password aer the device is powered on, the following screen
is displayed: