Curtis 3301T - Open the 3301 Ts Main Menu; Open the 3301 Ts Parameter Menus

2 — USING THE 3301T
Curtis Model 3301T Digital Instrumentation – September 2021
Return to TOC
pg. 10
e following list describes the default passwords for accessing parameter menus:
• User access level: 1111
• OEM access level: 2222
Curtis recommends that you change the default passwords. Passwords are changed with the OEM
Menu Password and USER Menu Password parameters on the Password menu.
e following topics describe how to open and use the screens.
Open the 3301T’s Main Menu
e 3301T’s main menu is not password-protected. Take the following steps to open the main menu.
Note: e parameters contained by the Monitor and Program menus are password-protected. To
open them, perform the steps in the next section.
1. Go to the home screen.
2. Press the
F1
button. e main menu displays and you can now view and edit parameters.
To exit the menu, press the
F1
button.
Open the 3301T’s Parameter Menus
You must enter a password to open all of the 3301T’s menus, which include the main menu, Program
menu, and Monitor menu. Take the following steps to open these menus.
1. Go to the home screen.
2. Press the
F2
button. e Password screen displays:
You can enter a password for either the User or OEM access level. e screen’s active access level
is highlighted in blue; in the example above, the User access level is active.