Curtis 700 series User Manual

TABLE OF CONTENTS Page
1. Model Encodement 2
2. Technical Specifications
2.1 Electrical 6
2.2 Mechanical 11
2.3 Environmental 14
3. Installation 15
4. Operation 16
5. Troubleshooting 19
6. Maintenance 19
Safety Instructions
This instrument was manufactured and tested according to the
applicable technical standards. It complies with all the safety
regulations as shipped from
the factory.
Installation and startup must be performed by skilled personnel.
Failure to install and operate the unit in accordance with these
instructions may result in damage or injury.
If safe operation of the instrument can no longer be ensured,
stop and secure it against accidental operation.
If instrument failure or malfunction may cause personal injury or
material damage, use additional safety measures such as limit
switches, guards, etc.
Read the Operating Instructions carefully before startup.
Note the safety instructions marked with this
warning symbol in this manual.
!

Curtis 700 series Specifications

General

Brand	Curtis
Model	700 series
Category	Measuring Instruments
Language	English