OPERATING INSTRUCTIONS OI23
("*3105#3&8&301&3"5*/(*/4536$5*0/4øø #
Brewing Instructions
2 Center an empty airpot under
the brew basket.
3 *OTFSUBDMFBOQBQFSmMUFSJOUP
the brew basket.
Fill with the proper amount
of ground coffee. Level the
DPGGFFJOUIFmMUFS
5 4MJEFUIFmMMFECSFXCBTLFU
into the brew rails under the
control panel. Slide it all the
way back until it stops.
The brewer will brew coffee based on the settings programmed into the universal control module (UCM). To
change the settings, see the PROGRAMMING GUIDE section.
The brewer should be ON.
$POmSNUIJTBUUIFSFBSUPHHMF
switch. “Ready to brew”
should be on the display. If
the brewer is connected to an
inter-lock grinder, the grinder
should be on. When inter-lock
connection is made, grind
coffee at this time.
6 Press the brew button. Brewing
will begin immediately.
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during
brewing. Do not remove the brew basket while “Brewing” appears on the display.
The G3 brewer is factory preset for optimal performance.
To Next Page
Loading...
Need help?
General
