INSTALLATION INSTRUCTIONS II1
19 If the UCM is not already lit, push the ON/OFF button
POUIF6$.8IFOUIFXBUFSMFWFMJOUIFUBOLSJTFT
to the correct volume, the heating elements will turn
on automatically. Depending on the incoming water
UFNQFSBUVSFBOEUIFFMFDUSJDBMTQFDJmDBUJPOTUIF
water tank typically requires 20 to 30 minutes to
SFBDIUIFGBDUPSZTFUPQFSBUJOHUFNQFSBUVSF8IFO
the water has heated, “Ready to Brew” should be on
the display.
20 #FGPSFCSFXJOHGPSUIFmSTUUJNFEJTQFOTFP[
ml of hot water through the hot water faucet to help
purge air from the tubing inside the brewer.
21 Brew a cycle of at least 12 oz./350 ml, to purge any
remaining air from the tubing. See OPERATING
INSTRUCTIONS. During the initial brew cycle and
XIFOFWFSUIFmMUFSJTSFQMBDFEZPVNBZIFBSUIF
TPVOETPGBJSCFJOHQVSHFEGSPNUIFmMUFSUVCJOHBOE
water tank.
((&.*/45"--"5*0/*/4536$5*0/4ø D
To Next Page
Loading...
Need help?
General
