EasyManua.ls Logo

CUSTERS CR 700 - Page 41

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
It is not allowed to make bridges between a mobile scaffold tower, unless specifically calculated
applications are used.
The maximum workload is 200 kg/m
2
(scaffolding class 3); only one level of maximum load per
scaffolding may be used. The maximum uniformly distributed load on a working platform is 275
kg.
It is prohibited to jump on the platforms; the hatch of the platform must always be closed except
when climbing or descending.
The maximum platform height is:
inside: 12 metres
outside: 8 metres
Do not climb the outside of the mobile access and working tower. The scaffold may only be
climbed from the inside through the frames. Alternatively hanging ladders, ladder platforms or
stairs can be used to gain height.
Take care that ladder platforms always have to be applied above a non-ladder platform or the
ladder should be supported by the fixed part of the ladder platform underneath. The hatches of
these platforms always have to be closed after use of the ladder. The design is as such, that the
hatches close automatically.

Other manuals for CUSTERS CR 700