EasyManua.ls Logo

CUSTERS CR 700 - Page 9

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
There must always be at least 1 platform with hatch on the working level; the working
level must be fitted with: guardrail, knee railing and toe boards all around. There must
always be at least one platform with a hatch on the resting level. The resting level
must be fitted all around with guardrails and knee railings and must be installed every
2 metres.
A resting level is converted into a working level through the installation of toe boards
all around.
Be aware that one level only shall be a working platform at one time.
It is to be taken into account that the correct platform height in relation to the
required work should be selected.
On a working platform a maximum of two persons are permitted.
The horizontal and diagonal braces have a self-locking claw. To unlock, just push the
coloured plastic part inwards and the brace can be removed.

Other manuals for CUSTERS CR 700