Custom Audio Electronics TK302 User Manual

3.6 Key functions: power up
FFLF S1 S2
Fast push
modify
selected parameter
FFLF S1 S2
Fast push
FFLF S1 S2
exit the
setup mode
next
parameter
Fast push
FFLF S1 S2
Hold down
FFLF S1 S2
Fast push
FFLF S1 S2
perform the
font test
print the setup report
with printer parameters
FFLF S1 S2
Hold down
initialize the notch sensor
and characterizes the paper
POWER UP
Hold down
enter the
setup mode
for the printer
parameters
FFLF S1 S2
skip the
setup mode
Fast push
print the setup report
with Ethernet parameters
and enter the
setup mode
FFLF S1 S2
Fast push
FFLF S1 S2
enter the
clock setup
Fast push
FFLF S1 S2
NOTE:
During power-up, do not press the S2 key because the device enter in a test modality that becomes unusable by keys;
if this event occurs then turn off the device and turn on without pressing any key.
31

Custom Audio Electronics TK302 Specifications

General

Brand	Custom Audio Electronics
Model	TK302
Category	Printer
Language	English