CyberPower RMCARD400 Quick Start Guide

5
7. Modify the IP, subnet mask or gateway address. Enter the new
addresses into the corresponding fields and then click “Save”.
6. You can modify the IP Address,
Subnet Mask, and Gateway
address for the Device MAC
Address listed in the Device
Network Settings window, as
shown in Figure 3.
The factory default IP Address
is 192.168.20.177 and the
default Subnet Mask is
255.255.255.0.
Figure 3. The Device Network setting window

CyberPower RMCARD400 Specifications

General

Brand	CyberPower
Model	RMCARD400
Category	UPS
Language	English