CYBEX 770R Cycle - Page 16

Cybex Owner’s Manual
16
Installconsoleassemblytobaseassembly.
1. Hand thread two screws into the base assembly.
1
2
3
4
5
Item Description
1 Console Assembly
2 13 Screws (2)
3 1 Base Assembly
4 Optional A/V Cable
5 Display Cable
The console assembly will need to be supported during steps 2 through 5.
2. Insert the display cable and optional A/V cable through the frame to the left side. Do not pinch
or damage the cables during assembly.
3. Place the console assembly in the correct position on the base assembly by sliding into
position onto the two mounting screws.
4. Hand thread the other two screws.
2
3
1
Item Description
1 Console Assembly
2 13 Screws (2)
3 1 Base Assembly
5. Securely fasten the four screws with a 1/2” socket wrench.