CYBEX 770R Cycle - Page 26

Cybex Owner’s Manual
26
Leveltheunit.
Conrm that the unit is on a level surface. If not, use a 9/16” open-end wrench to adjust the leveling
feet up or down.
1
Item Description
1 Leveling Feet (2)
Installcoaxcable(E3ViewMonitoroption)
Install 6’ coax cable to the coax cable connector in base of unit.
1
2
Item Description
1 12 6’ Coax Cable
2 Coax Cable Connector
Visuallyinspecttheunit.
1. Examine the unit to ensure that the assembly is correct and complete.
2. Proceed to Testing the Operation section.