CYBEX ATON - When using Infant Carrier without Base

Line MUST be level
with ground when
installed without
Base
37
Line MUST be level
with ground when
installed without
Base
Adjusting the Recline Angle
When using Infant Carrier without Base
Adjust the seat angle until the RED Level Line on the
Infant Carrier is level with the ground.
If you are having trouble achieving the proper recline
angle:
1. Uninstall Infant Carrier.
2. Place a tightly rolled towel or pool noodle
under the Infant Carrier, where indicated.
3. Continue installation.
English