CYBEX Pallas M-FIX User Manual

90
• If the vehicle is directly exposed to sunlight for a longer time, the child seat must be
removed from the vehicle or covered with a bright cloth.
• Regularly check all plastic and metal parts of the seat for damage, deformation or
change of colour. If you discover any changes, the child seat must be disposed or
checked and possibly replaced by the manufacturer.
• Changes to fabric, especially bleaching, are perfectly normal when used in a
vehicle and do not impair the seat’s function.
PRODUCT SERVICE LIFE
WARNING! An accident may cause damage to the child seat that is not
identifiable with the naked eye. Please replace the seat after an accident. In
case of doubt, please consult your dealer or the manufacturer.
HOW TO ACT FOLLOWING AN ACCIDENT
At the end of the child seat’s service life, it must be disposed of correctly. The
separation of waste may be handled differently from place to place. To ensure that
the child seat is disposed of in accordance with regulations, please contact your
local waste disposal institution or local council. Always observe the waste disposal
regulations of your country.
DISPOSAL
The CYBEX PALLAS M-x is designed to meet its specications for the entire
service life of approximately 11 years. However, as there can be very large
temperature uctuations and unpredictable strains in vehicles, the following points
must be observed:

CYBEX Pallas M-FIX Specifications

General

Certification	ECE R-44/04, Supplement 7
Mounting type	ISOFIX
Product color	Black
Car seat group	1-2-3 (9 - 36 kg; 9 months - 12 years)
Side protection	Yes
Belt fastening type	3-point

Weight and Dimensions

Depth	454 mm
Width	540 mm
Height	700 mm
Weight	9300 g