CYBEX Sirona M User Manual

REMOVING THE SEAT COVER
To remove please follow these steps:
1. Unfasten the Harness Buckle.
2. Unfasten the Chest Clip.
3. If using the Infant Insert, remove it.
4. Unsnap the Shoulder Pads.
5. Adjust the Headrest to
its highest position.
6. Unsnap the back of the Headrest.
7. Unsnap the two snaps
creating the Harness slot.
8. Lift back pad and Headrest
Cover off the Headrest.
9. Unsnap each side of the back
padding and pull forward.
10. Pull Seat Cover away from
Harness Adjustment cover.
11. Starting at the bottom of the
seat, pull the Seat Cover away
from the Child Restraint.
INSTALLING THE SEAT COVER
Reverse the removal instructions to
reinstall the Seat Cover.
The integrated Harness System cannot be removed from the seat.
NEVER remove or attempt to remove parts of the Harness System.
DO NOT damage, remove or dispose of any EPS foam.
1. REMOVING SHOULDER PADS
Unsnap and remove Shoulder Pads as shown.
2. INSTALLING SHOULDER PADS
Make sure Shoulder Pads are routed behind Headrest, as shown
a
.
Reattach Shoulder Pads by folding the snaps over the Harness Strap. Secure both
snaps. Make sure they are oriented as shown.
8079
A
R
M
P
I
T
L
E
V
E
L
A
R
M
P
I
T
L
E
V
E
L
A
R
M
P
I
T
L
E
V
E
L
A
R
M
P
I
T
L
E
V
E
L
A
R
M
P
I
T
L
E
V
E
L
A
R
M
P
I
T
L
E
V
E
L
1 2
a
CARE AND CLEANING
CARE AND CLEANING
EN

CYBEX Sirona M Specifications

General

Model	Sirona M
Category	Convertible Car Seat
Forward-Facing Weight Limit	22-65 lbs
Installation Type	LATCH or Vehicle Seat Belt
Orientation	Rear-Facing and Forward-Facing
Harness Type	5-point harness
Warranty	2 years
Height Limit	Up to 49 inches
Safety Features	energy-absorbing shell
Adjustable Headrest	Yes, 12-position