NEVER remove Harness or Harness components from Child Restraint.
NEVER use bleach, household cleaners or solvents.
DO NOT lubricate.
HARNESS STRAPS
Sponge clean using warm water and mild soap. Air dry. Do not iron.
HARNESS BUCKLE
Sponge clean or thoroughly rinse Harness Buckle with warm water. Test by
fastening and unfastening until an audible CLICK is heard after inserting each
Buckle Tongue into the Buckle. If CLICKS are not heard, repeat the cleaning
procedure.
LATCH CONNECTORS
Sponge clean or thoroughly rinse LATCH Connectors with warm water. Allow to
dry thoroughly. Test by connecting and disconnecting until an audible CLICK is
heard after connecting each connector to a lower LATCH anchor. If clicks are not
heard, repeat the cleaning procedure.
PLASTIC PARTS
Wipe clean with mild detergent and warm water.
SPOT CLEANING
Spot clean Seat Covers, Shoulder Pads,
Buckle Pad, and the Infant Insert as
needed with a clean cloth using mild
detergent and water.
WASHING INSTRUCTIONS
All seat cover parts can be washed as
follows:
• Preferably wash by hand in lukewarm
water
• Machine wash COLD, gentle cycle,
mild detergent
• Line Dry
To avoid shrinkage, DO NOT:
• DO NOT machine wash warm or hot
• DO NOT TUMBLE DRY
• DO NOT iron
• DO NOT use bleach
BUCKLE PAD
SHOULDER
PADS
NEWBORN
INSERT
HEADREST
COVER
SEAT COVER
8281
CARE AND CLEANINGCARE AND CLEANING
To Next Page
Loading...
Need help?
General
