CYBEX VR3 Owner's Manual

Assembly
Machine Specifications
Total Weight and Size VR3 Lat Pull 12130 Standard Stack
Machine Dimensions in UseMachine Dimensions at RestWeight
Same59” L × 55” W × 90” H540 Lbs
Same149 cm L × 140 cm W × 230 cm H245 Kg
Total Weight and Size VR3 Chest Press 12130 Heavy Stack
Machine Dimensions in UseMachine Dimensions at RestWeight
Same59” L × 55” W × 90” H620 Lbs
Same149 cm L × 140 cm W × 230 cm H280 Kg
Maximum Training WeightMaximum User Weight
305 lbs/138 kg300 lbs/135 kg
Choosing and Preparing a Site
Before assembling the unit, verify the chosen site meets the following criteria:
• Area is well lit and well ventilated.
• Surface is structurally sound and properly leveled.
• Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches (0.6 meters).
• Adjacent units may share the free area.
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate
clearance around each machine to allow for safe use and passage.
Page 7 of 21
VR3 Lat Pull Part Number 12130-999-4 T

CYBEX VR3 Specifications

General

Series	VR3
Equipment Category	Strength Equipment
Type	Selectorized
Adjustability	Yes
Dimensions	Varies by model
Material	Steel frame