To Minimize Fine or Hairline Scratches:
Mild automotive polish applied and removed with a soft clean cloth will help fill scratches.
Suggested Polishes:
• Johnson Paste Wax
• Mirror Glaze #10 Plastic Polish (by Mirror Bright Polish Co.)
• Novus Plastics Polish #1, #2 (By Novus Inc.)
Weekly Procedures
Inspect All Nuts and Bolts
Tighten all loose nuts and bolts as required.
Equipment hazard. To avoid serious injury or death replace worn or damaged
components immediately and keep the equipment out of use until repair is
completed.
Inspect Belts
Inspect all belts for wear or damage and proper tension. When inspecting belts, run fingers on the belt,
paying particular attention to bends and attachment points.
The following conditions may indicate a worn belt:
3D or Side View3D ViewCondition of Belt
Peeling of the belt’s skin.
Wave in belt
Page 16 of 21
VR3 Lat Pull Part Number 12130-999-4 T
To Next Page
Loading...
Need help?
General
