CycleOps PowerTap User Manual

CCOOMMPPUUTTEERR SSEETTUUPP 33
This setup menu includes:zero readings for power,speed,and cadence. NOTE:You are unable to
move back to a previously viewed setting. You must restart setup 3 to make corrections. NOTE:
These settings are useful for determining you average when pedaling only and
ddoo nnoott
effect the
data that is stored for download.
1) Press [SELECT] to toggle between yes and no for zeros included in aver-
age of watts. Press [MODE] to save.
2) Press [SELECT] to toggle between yes and no for zeros included in aver-
age of speed. Press [MODE] to save.
3) Press [SELECT] to toggle between yes and no for zeros included in aver-
age of cadence. Press [MODE] to save.
4) Press [SELECT] to toggle between yes and no for auto-zero function.
NNoorrmmaallllyy
leave at yes. NOTE:Auto-zero is used for track bike use where
large negative torque may be present. Hub modification to fixed hear is
necessary.
27
PRO
3
0’
s
YES
AV WATTS
PRO
0’
s
AV MI
YES
PRO
3
c av
0’
s
YES
PRO
3
t
YES

CycleOps PowerTap Specifications

General

Brand	CycleOps
Model	PowerTap
Category	Bicycle Accessories
Language	English