CCOOMMPPUUTTEERR SSEETTUUPP 44
This setup menu includes:sleep time,locations of display,cadence source,cycle computer mode,
heart rate monitor,and auto start/stop. You are unable to move back to a previously viewed set-
tings. You must restart setup 4 to make corrections.
1) Press [SELECT] to set how many minutes the computer will stay “awake”
after not receiving a valid speed or heart rate signal. Press [MODE] to save.
NOTE:The shorter the sleep time the better the battery life.
2) Press [SELECT] to determine what is displayed in the middle line.(mi =
speed,c = cadence,( ) = heart rate). Press [MODE] to save.The selected
metric will flash during the ride. NOTE:If heart rate or cadence is selected
speed is not displayed. This is useful for intervals when power,heart rate
and cadence are most important.
3) Press [SELECT] to determine cadence information source.
Default = pedal then hub
Pedal = crank only
Hub = hub only
NOTE:An optional cadence sensor is available (sold separately).
Press [MODE] to save.
28
PRO
4
4
SLEEP
PRO
4
mi
PRO
4
pedal
c
Hu
P
To Next Page
Loading...
Need help?
General
