3.5 Install the handlebar
3.6 Install the front light
3.6 Install the front light
Remove the handlebar clamp and its bolts. Sit the handlebar in place
and put back on the handlebar clamp. Then re-tighten the handlebar
clamp bolts.
3. Attach the clamps to the
front light brackets.
4. Tighten the bolts with an appropriate hex wrench and an
open-ended wrench.
5. Connect the power cable
of the front light.
05
1. Install the plastic adapters on
the desired positions of the two
fork tubes.
2. Attach the front light brackets
on the plastic adapters.
1 2
3
4 4
5
90°
To Next Page
Loading...