12
6.7 RS-232 & Telnet Commands
Command Description
A1~A4 Switch output A to 1~4
B1~B4 Switch output B to 1~4
C1~C4 Switch output C to 1~4
D1~D4 Switch output D to 1~4
E1~E4 Switch output E to 1~4
F1~F4 Switch output F to 1~4
G1~G4 Switch output G to 1~4
H1~H4 Switch output H to 1~4
A0~H0 Switch output A to F mute
ABCD…1~ABCD…4 Switch output ABCD… to 1~4
ABCD….0 Mute output ABCD… at the same time
SETIP<IP> <SubNet>
<GW>
Setting IP. SubNet. GateWay (Static IP)
RSTIP IP Conguration Was Reset to Factory
Defaults <DHCP>
IPCONFIG Display the current IP conguration
P0 POWER OFF
P1 POWER ON
I1~I4 Switch all the output to 1~4
I0 Mute all the output
ST Display the current matrix status and F/W version
RS System Reset to A1, B1, C2, D2, E3, F3, G4, H4
EM Setting EDID MODE. 1-STD 2-TV
? Display all the available commands
To Next Page
Loading...
