Cypress EZ-USB® FX3™ SDK Quick Start Guide, Version 1.3.1 54
The source file will always have CyU3PMipcsiCfg_t data based on the current
values in the Configuration Tab even if the Configuration tab data has errors in
it. The user must ensure that all errors on the configuration tab are resolved
before using the code from the Source tab.
Figure 7-17: Source Screen
8. Creating Multiple Configurations
Multiple MIPI CSI-2 configurations can be created as part of the same cycx file
by clicking on the green + icon on the top right of the configuration window. A
configuration can be deleted by clicking on the X icon next to the green +.
Figure 7-18: Creating Multiple Configurations
If using multiple configurations, the user should ensure that each configuration
is differently named.
To configure options from a specific configuration, click on the CX3
Configuration dropdown box, and select the appropriate configuration.
When multiple configurations exist in a cycx file, one CyCx3MipicsiCfg_t object
per configuration will be created in the source view as shown in the following
image.
Please note that error and warning messages are only displayed for the active
configuration that is displayed.
To Next Page
Loading...