Cypress EZ-USB® FX3™ SDK Quick Start Guide, Version 1.3.1 53
Figure 7-13: Errors in Input Data
Additionally, if any changes make data output not feasible across the interface,
an error message listing the error and action to be taken to resolve the error is
provided at the top of the screen and also in the Eclipse Problems view.
Figure 7-14: Error Displayed on the Top Bar
Figure 7-15: Error Displayed in the Problems View
Please follow the instructions provided by the error message to resolve the
issue.
7. Viewing/Using the source
Tabs allowing the user to switch between the configuration window and the
source generated based on the configuration details are provided at the bottom
left of the Configuration Tool window.
Figure 7-16: Source and Configuration Selection Tabs
Selecting Source, will take the user to the Source window from where the user
can export the generated source by copying it to the clipboard, or by saving it to
a C file using the provided export options.
The user can also copy just the structure and use in their source files.
To Next Page
Loading...