Cypress EZ-USB FX3 SDK - Configuring the CX3 MIPI CSI-2 Interface

Cypress EZ-USB® FX3™ SDK Quick Start Guide, Version 1.3.1 49
7.3 Configuring the CX3 MIPI CSI-2 Interface
The MIPI CSI-2 interface is configured using the CyU3PMipicsiSetIntfParams API.
This API takes an object of type CyU3PMipicsiCfg_t which contains various
parameters (Output data format, Clock dividers and configuration parameters, Data
lanes to use, horizontal resolution etc.).
A preliminary release of a graphical tool (CX3 Receiver Configuration Tool) that can
be used to generate the CyU3PMipicsiCfg_t structure object is provided as part of
the EZ-USB Suite Eclipse based IDE provided by Cypress.
This section provides the steps required to create the configuration data from the
graphical tool.
1. Create a new CX3 Configuration File.
From the File menu of the Eclipse IDE, select New -> Other.
Figure 7-3: CX3 Configuration File Creation Menu
From the New file dialog box, select the CX3 Configuration option under the
Cypress Folder and click on Next.
Figure 7-4: CX3 Configuration File Creation